Standard Co Glock 7075-T6 Trigger Performance Kit



Ships from Standard Co USA in Las Vegas, NV.

• Included: SHOE only, roll pin punch, preinstalled roll pin for easy installation
• 7075-T6 aluminum and Type III hard anodize
• Gen 3 & 4: Only work on 9mm full size and compact models. However if you have a full size or compact .40 model, you can swap the ejector and this kit will also work. WILL NOT WORK ON ANY SLIMLINE GLOCKS LIKE THE 43, 43X, or the 48.
• Gen 5: G17 Gen5, G19 Gen5, G19X, G26 Gen5, G34 Gen5, G45, G47
• Made in the USA


Designed for a better reset, and feel. We have designed our trigger to give you the best trigger pull possible with a stock trigger bar. Our flat faced design ensures a consistent feel, while our wide chamfers prevent any uncomfortable “digging” into your finger. Regardless of your finger placement you will enjoy this trigger.


Machined out of 7075-T6 aluminum and coating in Type III Hard Anodize. Our trigger does not feature any gimmicks like adjustability or wacky safeties. First and foremost, a trigger needs to work every time. So we have minimized the number of components and eliminated any fasteners that can “walk” their way out. No more checking for loose screws.


The use of a factory trigger bar means we have kept all three factory safeties intact. Our trigger does not require modifying springs, trigger bars, or connectors. You get the proven Glock system, with a more custom feel.


Installation can be done in only a few minutes. Simply disassemble your Glock, remove the old trigger bar & shoe. Then swap your trigger bar onto our trigger, and reassemble. No changing springs or fitting required. If you can use a punch, you can install our trigger. Each trigger comes with a punch to tap our pin into your factory bar.

Additional information

Weight 2 oz

You may also like…